Product Name

Hi-Way™ Riser Series

Description 

Lightbars with lift mechanisms for warning with elevated visibility.

Overview

Hi-Way™ Riser Lightbars are ideal for accident control, work zones, vehicle breakdown and other situations when it is safest to get a warning signal into an elevated position for visibility. These lightbars consist of two independent lightbars with lift mechanisms that raise the lightbars from a horizontal to a vertical position above your vehicle. A sturdy cast aluminum base supports the system which is available in two sizes, 48" (122cm) and 56" (142cm). Gas-assisted lifting arms move the lightbars into position smoothly and quietly.

• Strobe and LED lamp modules provide reliable, highly effective warning at greater distances.
• Two enclosed strobe and LED lightbars with extruded aluminum construction on a cast aluminum base.
• Two six outlet, encapsulated, 90 watt power supplies with four selectable flash patterns. (Some models have one.)
• Flash patterns: Rapid Rate Flash, Double Flash, Action Flash and CometFlash®. Defaults to CometFlash if no pattern is chosen.
• 400 Series strobe assemblies have soldered-in linear strobe flash tubes, in a highly polished reflector housing for reliability and maximum light output.
• 400 Series LED panels contain high intensity LED encapsulated within the module and offer a selection of fourteen individual flash patterns.
• Lenses are sturdy UV stabilized shatter-resistant polycarbonate.

Hi-Way™ Riser Series

• HIWAY48  48" (122cm)
  
• HIWAY56  56" (142cm)
  

Interior Packages:

• HWK1  The Front Lightbar Enclosure Consists of: 3 Red LED Front; 1 Red LED, 1 Amber LED & 1 Blue Strobe to the Rear w/ a Two Outlet, 20 Watt Output Power Supply & The Rear Lightbar Enclosure Consists of: 3 Red LED Front; 1 Red LED, 1 Amber LED & 1 Red Strobe to the Rear w/ a Two Outlet, 20 Watt Output Power Supply
• HWK2  Each Lightbar Enclosure Consists of: 2 Red Strobes, 2 Halogen Take-Downs to the Front; 1 Red LED, 1 Amber LED & 2 Amber Strobe to the Rear w/ a 90 Watt Output Power Supply
• HWK3  Each Lightbar Enclosure Consists of: 2 Red Strobes, 2 Halogen Take-Downs to the Front; 1 Red LED, 1 Amber LED, 1 Amber Strobe & 1 Red Strobe to the Rear w/ a 90 Watt Outputt Power Supply
• HWK4  Each Lightbar Enclosure Consists of: 2 Red Strobes & 1 Red LED to the Front; 1 Red LED, 2 Amber Strobe to the Rear w/ a 90 Watt Output Power Supply
  

Options:

• HWTIMER  Programmable Timer Module Allows for One-Touch Raising or Lowering of Highway Lightbar
• HWSWTCH1  Two Switches (1 On/Off & 1 Momentary)
• HWTABKT  Traffic Advisor™ Bracket for HIWAY48 Bar, Traffic Advisor™ Sold Separately

Mounting Kits:

• HWMTGK1  1998-2006 Crown Victoria Permanent Mount Kit
• HWMTGK2  2000-2005 Impala Permanent Mount Kit