 PDF Data Sheet | Product Name | SMD601 Walk-Through Metal Detector |  SMD601 Multizone | Description | The most advanced walk-through metal detector solution for law enforcement and correction facilities | Overview | The SMD601 Multi-Zone is specifically designed to comply with NIJ Standard 0601.02 "Walk-Through Metal Detectors for use in Concealed Weapon and Contraband Detection" which was the result of extensive consultation with the law enforcement and correction communities. The SMD601 features maximum sensitivity, discrimination and immunity in the detection of conventional weapons, such as pistols and knives, as well as small, hard-to-find items that could be considered a threat to officer and prisoner safety. The three levels of security specified by the Standard (large, medium and small object size) are pre-loaded into the SMD601 and can be selected directly by the user via a simple operation at the control unit.
The full-height light bar displays the horizontal location of the detected metal masses in transit, enabling rapid threat identification and a reduction or elimination of manual searches. The Anti-Vandalism Control Unit (IP65 in stainless steel) is built-in and programming access is protected both by a mechanical lock and by alphanumeric passwords.
The SMD601 Multi Zone is manufactured using the most advanced electronics technology, conforming to ISO 9001 Quality Control Standard procedures.
| Standard Features | - Immediate selection (parameter IS) of security levels specified by NIJ Standard 0601.02
- Chip-Card selection of additional threat levels
- Detection of magnetic, non-magnetic and mixed alloy metal weapons
- Photocell transit counter and automatic alarm rate calculation
- High speed of detection: up to 45 ft (13.7 m) per second
- Extremely high immunity to electrical and mechanical interference
- Cable-free automatic synchronization between two or more metal detectors, at a minimum distance of 7.8 in (20 cm) from each other
- Professional high integration and high reliability electronics
- Control unit incorporated into the detector
- No initial or periodic calibration
- Easy maintenance: modular control unit for rapid replacement
| Method of Operation | - Programmable operation controlled by microprocessor
- Programming via built-in keypad and display or RS232 serial connection to Remote Control Unit (CEIA RCU), PC or computer network
- Programming access protected by a mechanical lock and two alphanumeric passwords
| Dimensions | - Total height: 88.8" (2.255 m)
- Passage height: 80.7" (2.05 m)
- Passage width: 28.35" - 32.88" (72 - 83.5 cm)
| Color | Light grey RAL 7040 | Options/Accessories | - NIJ Standard 0601.02 test kit
- Remote control unit (CEIA RCU) with 65.6 ft (20 m) of connection cable
- External Main Battery Supply Unit MBSU-1, including emergency batteries and automatic charger, providing about 5 hours of independent operation
- Ethernet network controller for CEIA metal detectors
- MD Scope: software for oscilloscope simulation and terminal operation on CEIA metal detectors
| Installation Data | - Power Supply: 115 / 230 VAC, ±15%, 50 ÷ 60 Hz, 40 VA
- External interface: RS-232C for connection to a Remote Control Unit (RCU), a terminal, a computer, an external modem or other CEIA Metal Detectors
- Operating temperature: 14°F to 149°F (-10°C to 65°C)
- Storage temperature: -31°F to 158°F (-35°C to 70°C)
- Relative humidity: from 0 to 95% (without condensation)
| Alarms | Visible signals
- Multi-zone display bar for “height on person” localization
- High intensity display
- Green and red metering signals proportional to the mass of the detected object
Audible signals
- High acoustic intensity alarm signal
- Programmable volume and tone of alarm signal
| Certification & Conformity
| - Compliant with the Human Exposure Safety Requirements specified by NIJ Standard 0601.02
- Conforms to the current International Security Standards for Walk-Through Metal Detectors
- Complies with EC Regulations and International Standards
relating to Electrical Safety and Electromagnetic Compatibility (EMC)
| Optional Accessory: Protective Cover | TSA Approved Protective Covers for Screening/Detection Equipment Designed to provide maximum protection against water damage in the event of natural disasters. Completely waterproof and can withstand hurricane force winds. Lightweight and form-fitted for ease of deployment and handling. | HighCom Item | 04.01.08 | Comparable Products | Magnascanner MS 3500, Metor 200 HS |
|
