SMD 600 Multi Zone Walk Through

The Most Sensitive Detector Available for the Corrections Industry.

General Description
The SMD600 Walk-Through Multi Zone is a new-generation ultra-high sensitivity walk-through metal detector designed to satisfy the strictest security requirements, especially in penitentiaries and other applications where the detection of extremely small metal masses is required, even if hidden in body cavities.

It meets all International Security Standards currently adopted in public and private installations. The SMD600 Walk-Through Multi Zone is characterized by very high immunity to electrical interference in the surrounding environment as well as mechanical vibrations; as a result, it can be installed in those environments where the standard Walk Through Metal Detectors could not be installed before.

A full-height light bar displays the horizontal location of the detected metal masses in transit. This results in rapid identification of threat and a reduction, or elimination, of manual searches.The detector's control unit is incorporated into the structure of the device, and is available in the standard (IP20) and anti-vandalism (IP55 in stainless steel) versions.

Access to programming is protected both by a mechanical lock and by two alphanumeric passwords. The Walk-Through Metal Detector's sensitivity does not depend on the speed of transit, and thus makes for a high flow rate.

Advantages
• Complete Security Detection
• Ultra High Sensitivity to all Metals
• Exceeds all Security Standards for Walk-Through Metal Detectors
• Very High Immunity to external Interferences
• Highly visible double display provides single or multiple location of metal objects in transit
• Extremely High Reliability
• Local or Remote programming with Networking Capabilities
• Anti-Vandalism Control Unit

Documentation SMD 600 Multi Zone Brochure

Technical Data

Main features
• International Standards: immediate selection of International Security Standards.
• Detection of magnetic, non-magnetic and mixed alloys metal weapons.
• High detection speed: up to 45 feet per second.
• Very high immunity to both electrical and mechanical interference.
• Programmable operation controlled by microprocessor
• Programming: via built-in keypad and RDU or RS232/RS485 serial connection to PC or computer network.
• Programming access protected by a mechanical lock and two alphanumeric passwords.
• Cable-free automatic synchronization between two or more Walk Through Metal Detectors at a minimum distance of 2 inches from each other.
• High-integration professional electronics and maximum reliability.
• Control unit incorporated into the detector.
• No need for initial or periodic calibration.
• Easy maintenance: the control unit can be replaced within one minute.
• Color: light grey RAL 7040

 

Alarms
Visual signaling:
• Multi-zone display bar for "height on person" localization.
• High intensity display.
• Green and red signals.

Audible signaling:
• High acoustic intensity alarm signal.
• Volume and tone of alarm signal can be programmed.
• Steady tone or tone length proportional to the mass of the object detected.

Certification and conformity
• Harmless to wearers of pacemakers or other vital support systems, pregnant women and magnetic storage media (floppy disks, audio cassettes, video cassettes and similar).
• Conforms to the FAA "3-Gun-Test" standard and to the NILECJ-0601-00 standards for all security levels.
• Satisfies EC regulations and international standards relating to electrical safety and electromagnetic compatibility (EMC).

Installation Data
Power Supply:
• 115 / 230 VAC, ±15%, 45-65 Hz, 30 VA MAX
Inputs:
• RS-232C interface for the connection with a terminal, a computer or an external modem
• RS-232C interface for the network connection with other walk-through metal detectors
• Temperature and relative humidity: from -15°C to +50°C; from 0 to 95% (without condensation)

Accessories / Options

Photocell transit counter Photocell transit counter and automatic alarm rate calculation Built into both panel and column antennae, the photocells allow the number of people passing through the walk through metal detector to be counted. The photocells are particularly useful in all situations where statistical analysis has to be carried out on the access point (number of transits, alarms and percentage of alarms).
Back up batteries Back up batteries with 45 minutes of independent operation Two 12V-0.8Ah batteries built into the antenna which switch in automatically and allow about half an hour of independent operation (low power mode) in the event of a mains failure. The batteries recharge automatically when power returns.
Outdoor version Waterproof degree IP55
External Main Battery & Supply Unit MBSU including emergency battery External Main Battery Supply unit, including two 12 Vdc 7Ah emergency batteries and a charger. Battery life (normal condition): 9h max. Recharging time: 7h at 50% of the full charge. Protection degree (lEG 529) : IP55
Personal Effect Depository This article acts both as a spacer between the X-ray unit and the walk through metal detector and as a temporary depository for metal personal effects which are not of dubious nature and therefore not required to undergo X-ray analysis (coins, keys and so on). The base is constructed in material that guarantees maximum compatibility with the Walk Through Metal Detector, and in such a way as not to transmit any mechanical shocks from the X-ray unit to the inspection gate.
MDSCOPE Software package specifically developed in order to allow easy and complete testing of the functioning of a walk through metal detector - without the use of special instrumentation - both during the setting up phase and on the occasion of periodic tests. Using a personal computer, MDSCOPE allows adjustment and monitoring of the walk through metal detector, as well as the storage and printing of the data gathered.
Remote Control Unit with 20m of connection cable. The RCU unit, which is connected to the walk through metal detector via a serial link, allows programming to be carried out by remote control. The unit also provides audible and visual alarm signalling, with a bar-graph indication that is proportional to the metallic mass in transit.
Ethernet Network Controller The MDNC-1 is an Ethernet Network Controller that can be connected to Walk Through Metal Detectors through the RS-232 interface. It contains a real-time clock with battery backup, and a large buffer for storage of more than twenty thousand transit events. This ensures that no data is lost in case of a network outage. As soon as the network service resumes the transit data is transferred to the NetID™ database. The MDNC-1 is supplied with the MDNC Admin MS Windows application, which is used to assign the desired network configuration and the encryption key.

Comparable Products
The SMD 600 Walk-Through Multi Zone offers similar operating capabilities as the following walk through metal detectors: Magnascanner MS 3500 and Metor 200HS.